Sitall Glass for RepRap 3d printer Heat platforms.

Sitall Glass for RepRap print Heat platforms.
Ситалловое стекло для 3Д принтера.

Printing on U3D Sitall Glass Plate from good adhesion.
Printing ABS, HeatBed 120с. Glass is not processed. Kapton, glue stick, hairspray or adhesive tape were not used.
The product are sticking very tightly. Its hard to rip even with significant force. When printing will ends and HeatBed cools to 80C, model will unstick by itself.
We recommend you to use Sitall Glass to save your time and get perfect results from beginning to end.

Ситалловое стекло кладется на нагревательный элемент ( HeatBed ) 3D Принтера.
Имеет отличную адгезию ABS,PLA,FLEX,WOOD пластика во время печати. Печать происходит без обработки стекла лаком для волос, не нужен КАПТОН и клей карандаш. Изделия трудно оторвать даже если приложить значительное усилие. Когда печать заканчивается и HeatBed остынет до 80C, изделие отлипнет само.
При использовании Ситаллового стекла, Вы экономите время и получаете отличный результаты от начала и до конца печати.

Sitall Glass the 4.0mm glass plate provides a tough, super flat, chemical and heat resistant build surface which you may print directly onto glass, without cover Kapton Tape, glue stick, hairspray or adhesive tape. Typically the Sitall Glass is secured with 4 to 6 mini “bull dog” clips to the underlying heated bed. The little clips hold the glass plate surprisingly well and allow for easily swapping out the glass plates between prints.

U3D Sitall Glass Bed Features:
- Excellent build surface for both ABS
- Low thermal expansion
- Resistant to thermal shock / temperature cycling far in excess of intended use
- Cut for heated bed platforms

http://www.unique-3d.com/

http://www.unique3d.ru/