Kiss V2 DJI Hybrid full build / Pt 1 of 2

Part 1 of 2 of the full build video of my second Halorc Osiris featuring Kiss V2 and the DJI System. This build will give you a great flying Kiss V2 quadcopter without the expense of buying Kiss Escs.
At a later date i’ll add GPS to this.

Full list of parts used -

Halorc Osiris 5″ frame – https://halorc.uk/products/frames/osiris/

Kiss V2 Flight controller – https://tinyurl.com/sh3v69g

Iflight Xing E 2207 1800kv – https://www.banggood.com/custlink/GvmGbUYLeF

Spedix GS40F esc (Chosen as it has an f3 processor so can run Dshot 2400 – although Dshot 600 is fine on Kiss) – https://www.banggood.com/custlink/G33DbkdLei

Alternative Aikon esc – https://www.banggood.com/custlink/33DGsqEjsZ

DJI AIr unit & Goggles – https://tinyurl.com/so4g7dz

Vifly buzzer – https://www.banggood.com/custlink/vmvKbkRoBA

TBS crossfire – https://tinyurl.com/w7svlxn

Impulse rc Apex armguards – https://tinyurl.com/tsbddjt

Iflight 12V reg – https://www.banggood.com/custlink/K3GDAzyjbr

Props – Ethix S3 – https://tinyurl.com/vjplr8b

Panasonic 680uf FM series low esr capacitor

Blheli_32 can be found here – https://drive.google.com/drive/folders/1Y1bUMnRRolmMD_lezL0FYd3aMBrNzCig

Sundry items and tools -
Multimeter
Smokestopper (few quid from rc hobby shops)
3M double sided foam tape
Hex Drivers 1.5mm, 2mm & 2.5mm
M3 Bolts for stack attachment (buy long and cut them to size)
Heatshrink
pack of multiple size heatshrink
clear heatshrink 20mm flat
Soldering Iron
1MM 60/40 or 63/37 2% rosin core solder (dont use lead free – its rubbish)
MG chemicals conformal coating
Black insulation or electrical tape
Small wire cutters

Most of the links are to unmannedtech who I usually buy from in the UK. They are not affiliate links. Hobbyrc and quadcopters.co.uk are also good. Banggood links are affiliate so anything you buy after clicking them will help support the channel.