How to unfreeze Motors on Teddy Ruxpin

You have to take your time don’t want to damage any wires you don’t want to lose any screws you have to keep all the Springs they help the motor communicate with his eyes and mouth you have to remove outfit battery cover and tape before you start ripping in carefully opening his head exposing foam underneath be careful not to rip It after carefully carrying it away from the plastic mask snapped into his face with the fur this is pretty easy except for pulling the foam off the head remember if you can glue it back which you should glue it back how to remove it you should squeeze it not too hard try to loosen when it is loose pull it off put that somewhere be careful not to tear the neck there is a neck support attached if you need to put layers of silicone to make it stronger Bedrock not messing with it cuz you need to glue it back on later you need to protect Teddy’s head with it that’s what houses the face and holds the motors and only if you need to otherwise don’t pull the foam off the bottom only if you need to replace the battery Springs otherwise do not pull it off the body do not pull it off only if necessary like if you need to fix the neck or wash the fur also be careful unsnap in your face cuz that’s where the motors are stored and you do not want to risk damaging the motor housing what is his face after you put all of that polyurethane foam ahead it is usually squishy and yellow sometimes right now squeezing foam pad I can see fat he’s pretty squishy right now the frame isn’t broken this will get tetty working again