EGR Valve Tube Corrosion Repaired with SSF-6 Silver Braze and a Propane Torch

A local auto repair shop had a job for SSF-6 brazing rod from http://MuggyWeld.com. Today it was an EGR Valve Tube that was eaten through by corrosion. The part was a day away and $100 to replace. One of the mechanics cleaned it with a wire wheel to remove all the contaminates before using the SSF-6 to seal the system. We had to tin the surface on both sides and then bridge the gap with the brazing rod. We worked our way around until the work area was completely closed. We weren’t going for a pretty repair just a functional job with no leaks.

Please read all instructions prior to use at: https://www.muggyweld.com/wp-content/uploads/2017/04/SSF-6-instructions.pdf

For more videos and information, or to order, visit http://MuggyWeld.com

International customers, please order at: http://www.ebay.com/usr/muggyweld
_________________
Please visit http://www.aws.org/technical/facts/ prior to using Muggy Weld products, and adhere to all AWS welding safety guidelines. Further product safety information is available at http://muggyweld.com/safety-guidelines.

Muggy Weld LLC shall not be liable for any loss, injury, claim, liability, or damage of any kind resulting in any way from (a) your use of this Site, (b) any services or products obtained from this Site, (c) any errors in or omissions from this Site, (d) the unavailability or interruption of this Site or any features thereof, (e) any content contained on this Site.

MSDS sheets available with purchase from MuggyWeld.com, upon request.