Die cutting Masking Tapes for PCB protective

Product Description

Masking Tape is a gold coloured specialty masking tape with a flat paper backing and a synthetic adhesive, well suited for holding, bundling, sealing and paint masking, particularly where exposure to sunlight is expected.

Key Features

Masking Tape can be used for a wide range of masking applications, especially for applications where UV resistance and clean removal is required and with an optimum temperature of 100°C for 30 minutes.

Advantages

Flat paper backing, synthetic adhesive, smoothness, easy tear, solvent and water resistance, good paint anchorage, adhesive transfer resistance and sunlight stability.

Benefits

Good paint line, good handling, helps resist paint bleed through, paint flaking resistance, adheres easily, clean removal from most masking surfaces.

Typical Physical Properties

Adhesive Acrylic

Backing Paper

Colour gold

Thickness (AFERA 5006)  0,085 mm

Performance Characteristics

Note: the following technical information and data should be considered representative or typical only and should not be used for specification purposes

Adhesion to steel (AFERA 5001)  2.0 N/25mm

Tensile strength (AFERA 5004)  76 N/25 mm

Elongation (AFERA 5004)  6 %

Temperature Performance 100°C max.

Storage

Store in clean dry place. Temperature of 21 °C & 50 %relative humidity are recommended.

Shelf Life

Masking tape  has a shelf life of 12 months   when stored in the original carton at 21°C (70°F) & 50 % relative humidity.

For Additional Information

To request additional information or to arrange for sales assistance, contact us freely.

Important Notice

All statements, technical information and recommendations contained in this document are based upon tests or experience that  kingzom believes are reliable. However, many factors beyond kingzom’s control can affect the use and performance of a kingzom product in a particular application, including the conditions under which the product is used and the time and environmental conditions in which the product is expected to perform. Since these factors are uniquely within the user’s knowledge and control, it is essential that the user evaluate the kingzom product to determine whether it is fit for a particular purpose and suitable for the user’s method or application. All questions of liability relating to this product are governed by the terms of the sale subject, where applicable, to the prevailing law

Values presented have been determined by standard test methods and are average values not to be used for specification purposes. Our recommendations on the use of our products are based on tests believed to be reliable but we would ask that you conduct your own tests to determine their suitability for your applications. This is because kingzom cannot accept any responsibility or liability direct or consequential for loss or damage caused as a result of our recommendation.

Note: Custom sizes are available upon request and supply free sample for test.